Lathe principle
来源： 作者： 发布日期：2021-06-27 访问次数：648
Lathe principle
Lathe machining a part, there are two processing forms: one is fixed to the turning processing of the unformed workpiece rotation, and the other one is fixed to the high-speed rotation of the workpiece through the workpiece, the tools for lateral and longitudinal movement of the machining accuracy. Its technical characteristics are:
Easy to ensure the accuracy of each machined surface of the workpiece; machining the workpiece around a fixed axis of rotation, each surface has the same axis of rotation, it is easy to ensure that the requirements of concentricity between the machined surface.
Cutting process is relatively stable; apart from intermittent surface outside lathing process is generally carried out continuously, unlike milling and planing, in one go during tooth has repeatedly cut and cut out an impact.
Parts suitable for non-ferrous metal finishing; certain non-ferrous metal parts, due to the lower hardness of the material itself, the plastic is better, with the other processing methods difficult to get smooth surface.
The tool is simple; turning is one of the simplest tools, manufacturing, and installation is very easy sharpening, which facilitates the processing according to the specific requirements of rational choice perspective.
Lathe machining a part, there are two processing forms: one is fixed to the turning processing of the unformed workpiece rotation, and the other one is fixed to the high-speed rotation of the workpiece through the workpiece, the tools for lateral and longitudinal movement of the machining accuracy. Its technical characteristics are:
Easy to ensure the accuracy of each machined surface of the workpiece; machining the workpiece around a fixed axis of rotation, each surface has the same axis of rotation, it is easy to ensure that the requirements of concentricity between the machined surface.
Cutting process is relatively stable; apart from intermittent surface outside lathing process is generally carried out continuously, unlike milling and planing, in one go during tooth has repeatedly cut and cut out an impact.
Parts suitable for non-ferrous metal finishing; certain non-ferrous metal parts, due to the lower hardness of the material itself, the plastic is better, with the other processing methods difficult to get smooth surface.
The tool is simple; turning is one of the simplest tools, manufacturing, and installation is very easy sharpening, which facilitates the processing according to the specific requirements of rational choice perspective.